When I first open in Centos7 kettle7.1 repository, the repository shows a blank page - etl

When I first open in Centos7 kettle7.1 repository, the repository shows a blank page。
enter image description here


How to get entire GIT repo url in TFS?

Only got a repo name and project name from my colleague.
How do I get the entire GIT repo url in TFS? What pattern does it follow?
Could I directly use the url in the browser from web?
Yes, you could directly use the url when you open the repo in the web portal.
A more common approach is using Clone command in the top right corner. You should either select http or ssh url and just click copy command.
As for the format, the url will be something as below:
More details please take a look at the answer from bryanmac in this question: Connect to git repository in TFS or Visual Studio Online

How to download all documents from OWASP (github)?

I wanted to download all the documents from OWASP repository in github:
I haven't found an action button where I can download all documents in just one click (I need to enter each page to download).
Why don't you use the zip archive? https://github.com/OWASP/DevGuide/archive/2.0.1.zip .
By default, the page of a repository will give the link to download the zipped master branch, clicking on "Download ZIP" (on the right column). If you select the appropriate branch, in your case, the 2.0.1 branch, you can use the same "Download ZIP" which will targets the selected branch.
In a general way, in Github, you can download the content of a repository in the following way:
Downloading the zip archive is probably best for your purposes (see #eblondel's answer) but if you have git on your system you could also just clone the archive:
> git clone https://github.com/OWASP/DevGuide.git
> git checkout 2.0.1
Then look in the 'DevGuide 2.0' directory of the resulting folder.

No changes to commit Android studio SVN

I have an Android project on Android studio and I am trying to put it in my subversion repo and do commits. First I enabled version control in the VCS drop down menu in Android studio and imported my project into my subversion repository. The project is there and I can see it. When I make some changes to my code and try to commit it, it says "No changes detected". All my files are turned red too. Am I not doing something correctly? How do I do this?
By default, Android Studio doesn't mark local actions as repo actions.
To mark a newly created file as an SVN add, you can right-click on the file (either in the hierarchy or the editor tab) -> Subversion -> Add. As you can imagine though, this is quite cumbersome to do for every single file.
To change the setting so that newly created files are instantly marked as a repo add, go to Preferences -> Version Control -> Confirmation -> Add silently (under the 'When files are created' category).
You are definitely doing something wrong here. If you can't determine what step is wrong or missing, then read the documentation.
Android Studio is based on IntelliJ IDEA so it's documentation should help. Take a closer look at this chapter: Importing a Local Directory to Subversion Repository.
Otherwise, try using a command-line client to svn import your Android Studio project to Subversion repository and then svn checkout the working copy of this project to your machine. If you are curious what's going on with the working copy that gives you "No changes detected", run svn status -v against it.
Read SVNBook!
First install Tortoisesvn. During installation follow this steps
1.Run the the TortoiseSVN Installer.
2.Select the option to Modify.
3.select the check box "Install Command line client tools on to the local harddrive".
4.Add C:\Program Files\TortoiseSVN\bin to your Path environment variable or press CTRL+ALT+S in android studio. Then go to "Version Control"-> Subversion -> General -> Check the Checkbox "use commmand line client" and set the path to C:\Program Files\TortoiseSVN\bin\svn.exe
5.Restart IntelliJ.
This could be pretty easy rather than other stuff mentioned above. In
Android studio1.5 version when you try to add the file in your project,
android studio will ask for a pop like "schedule for Addition"
to subversion?. select the check box (Remember, don't ask again) and click "yes".
After this whatever the file you add or remove to your project it will automatically
synced to your svn repository. suppose if you didn't get that dialog, but you want to
add the newly added .png or xml file to svn means you can manually select those files
which you have added (the newly added file will be in red color) right click
on that file -> subversion -> Add to VCS or simply select the file and use (CTRL+ALT+A).
In the image green color(logo_actionbar) represents to file was already added to svn, red represents yet to add in svn. cool..!
No changes to commit Android studio SVN
When your all project turns to red means your project is not version controlled. This means you have to add your project to SVN or checkout it from version control url.
Hope this will resolve your problem.
Here I am describing the steps how to do it right way, take a look - --
Step :1) Click on VCS (in upper toolbar) in dropdown click on Checkout from Version Control in its options Click on Subversion
You will see the popup like this -
Step :2) Click on the '+' button(As Marked Red in Above Image) at the top and You will see the screen like this -
in the Edit area as shown above put the URL of your repository and click ok. And you will see the screen as below
Step :3) So as in the above image your URL will be shown in the text area with all its contents. Now click on Checkout (at bottom left). Next screen will be as below
Step :4) As seen in the above screen shot it will ask you for the Destination folder to checkout your code. Select the destination folder and click ok. And it will show you the screen as below.So after while your source code will be in the destination folder.
Step :5). After successful checkout it will ask to open the that code with Android Studio, click 'YES'.
Step :6) Now Goto Settings - > Version Control -> Subversion. As shown Below --
Step :7) As in the above screen there are three checkboxes (Marked as Blue Circles). So may be they are checked, now Uncheck all the checkboxes and click ok.
Step :8) Now close your Android Studio and restart Again.
Hope this will be Helpful !!
Happy Coding !!!! ;)

importing rules.csv file to sonar

i am having a file rules.csv in ms-excel format. The rules.csv is downloaded from quality profiles of other sonar server.Now i want to implement my sonar with same quality profiles.now my questions are
how to import csv file to sonar
rules.csv file is enough to create the same quality profiles of other
Steps to make a backup/reimport
Go to Configuration --> Quality Profiles
Click the Backup-Button of the desired profile and save the file
Go to the target sonar instance
Go to Configuration --> Quality Profiles
Click Restore Profile (it is in the upper right corner and a bit hard to miss.)
Select the previously saved file
Related Sonar documentation can be found here.
If you are not admin on the source sonar and you want to get the profile there will be no backup button. Try to find out the internal ID of the profile (look at the link URL in the Quality Profiles list) and then download it like this:
curl http://target-sonar-instance/profiles/backup/15 -XPOST > ~/Downloads/profile.xml
(where 15 is the ID you found)

Android Studio setup wizard doesnt show symbolic links

While installing Android Studio 3.0.1 for Win 10 64-bit, my path to SDK contained non-ASCII characters.
So I created a symbolic link like here. I ran cmd as admin.
But when I try to select the link in the setup wizard, to solve the ASCII problem, the link doesn't show up, only normal and hidden folders show up. I don't see the symbolic link i created.
I have selected random folder, but couldn't install anything. I went on, the "Welcome to Android Studio" window popped up. I selected Configure -> Project Defaults -> Project Structure. I tried to type the location of the symbolic link in "Android SDK location", but it said, "The path does not belong to the directory"...
What to do to show up the symbolic link?